> For the complete documentation index, see [llms.txt](https://tmediadocs.telcobridges.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://tmediadocs.telcobridges.com/configuration/web-portal-3-3/fax/fax-passthrough-nse/configure-fax-nse.md).
# Configure Fax NSE
> **Applies to:** Tmedia 3.0, 3.2, 3.3; SBC 3.1, 3.3
**To enable NSE:**
1. Select **Profiles** from the navigation menu.
2. Click **Create New Profile**
3. Enter a name for the Fax Profile.
* Click **Fax/Modem Relay** to expand the view.
4. Configure the settings:
* Set **Enable Fax/Modem Relay** to enabled.
* Set **Detection Mode** to Standard.
* Set **Relay Mode** to Passthrough.
* Select a codec. For example **silence suppression**
* Set **Use NSE** to enabled 
5. Verify that the **Profile was successfully created** message is displayed.
Northbound Interface
**Path**
```
/configurations/@[configuration_name]/profiles/@[profile_name]
```
**Parameters (text)**
```
/configurations/@[configuration_name]/profiles/@[profile_name]
name = "FaxPassThrough"
/configurations/@[configuration_name]/profiles/@[profile_name]/call_transfer_options
call_transfer_mode = "Relay"
call_transfer_timeout = "1 minute"
terminate_transferor_immediately = false
/configurations/@[configuration_name]/profiles/@[profile_name]/ivr_record
vad_enabled = false
vad_noise_floor_level = "-30"
/configurations/@[configuration_name]/profiles/@[profile_name]/lnp_options
incoming_lnp_mode = "Terminate LNP"
outgoing_lnp_mode = "No LNP insertion"
/configurations/@[configuration_name]/profiles/@[profile_name]/mlpp_options
look_ahead_for_busy = "LFB allowed"
network_identity = 0
outgoing_mode = "No MLPP insertion"
precedence_level = "PL flash override"
service_domain = 0
/configurations/@[configuration_name]/profiles/@[profile_name]/tdm_line
subject_to_electric_hybrid_echo = true
/configurations/@[configuration_name]/profiles/@[profile_name]/tones_and_call_progress_options
busy_tone_max_duration = "30 seconds"
default_digit_duration = 100
default_interval_between_digits = 60
generate_busy_tone = false
tone_definition_profile = "USA-Canada"
/configurations/@[configuration_name]/profiles/@[profile_name]/tones_and_call_progress_options/early_media_relay_and_ring_tone_generation
connect_full_duplex_during_early_media = false
delay_before_connecting_early_media = "0 millisecond"
incoming_calls_early_media_mode = "Forward from outgoing to incoming call"
outgoing_calls_early_media_mode = "Automatic early media detection"
ring_tone_starting_state = "Call Alerted"
```
**Parameters (json)**
```
{
"call_transfer_options" : {
"call_transfer_mode" : "Relay",
"call_transfer_timeout" : "1 minute",
"terminate_transferor_immediately" : false
},
"ivr_record" : {
"vad_enabled" : false,
"vad_noise_floor_level" : "-30"
},
"lnp_options" : {
"incoming_lnp_mode" : "Terminate LNP",
"outgoing_lnp_mode" : "No LNP insertion"
},
"mlpp_options" : {
"look_ahead_for_busy" : "LFB allowed",
"network_identity" : 0,
"outgoing_mode" : "No MLPP insertion",
"precedence_level" : "PL flash override",
"service_domain" : 0
},
"name" : "@[profile_name]",
"tdm_line" : {
"subject_to_electric_hybrid_echo" : true
},
"tones_and_call_progress_options" : {
"busy_tone_max_duration" : "30 seconds",
"default_digit_duration" : 100,
"default_interval_between_digits" : 60,
"early_media_relay_and_ring_tone_generation" : {
"connect_full_duplex_during_early_media" : false,
"delay_before_connecting_early_media" : "0 millisecond",
"incoming_calls_early_media_mode" : "Forward from outgoing to incoming call",
"outgoing_calls_early_media_mode" : "Automatic early media detection",
"ring_tone_starting_state" : "Call Alerted"
},
"generate_busy_tone" : false,
"tone_definition_profile" : "USA-Canada"
},
"custom_cause_maps" : {
},
"tdm" : {
"ss7" : {
"default_backward_call_indicator" : "0x5404",
"default_backward_call_indicator_enforce_mask" : "0x0000",
"default_forward_call_indicator" : "0x2001",
"default_forward_call_indicator_enforce_mask" : "0x0000",
"dont_forward_early_acm" : false,
"force_backward_call_indicator_in_anm" : false,
"forward_application_transport_ie" : false,
"forward_call_cpg_hold_retrieval" : true,
"forward_call_indicator_international" : false,
"forward_call_suspend_resume" : true,
"hop_counter_ie_handling" : "Decrement and forward",
"send_charge_number_ie_in_iam" : false
},
"ss7_or_isdn" : {
"always_send_alerting" : false,
"cnam_collection_timeout" : "1 second",
"cnam_using_alternate_methods" : false,
"colr" : false,
"information_transfer_capability" : "Relay",
"network_specific_facilities_ie" : "",
"send_connected_number_ie" : false,
"send_display_ie" : false,
"support_2_calling_number_ie" : false
}
},
"voip" : {
"fax_modem_relay" : {
"detection_mode" : "Standard",
"enable_early_fax_modem_tone_detection" : false,
"enable_fax_modem_relay" : true,
"expected_cng_tones" : 2,
"fax_modem_passthrough_parameters" : {
"codec" : "PCMU",
"detection_type" : "Silence suppression off",
"force_v152_vbd" : false,
"jitter_buffer_depth" : 40,
"packet_duration" : "20ms",
"support_v152_vbd" : false,
"use_nse" : false
},
"fax_modem_tones_detection_duration" : "30 seconds",
"modem_vs_fax_distinction_timeout" : "0 millisecond",
"relay_mode" : "Passthrough",
"switch_to_fax_relay_upon_cng_tone" : true,
"switch_to_passthrough_upon_bell_ans" : true,
"t38_parameters" : {
"fill_bit_removal" : false,
"max_bitrate" : "14400",
"redundancy_count" : 0,
"transmission_level_minus_dbm" : 10,
"use_v34" : false
}
},
"rtp_and_audio" : {
"clear_channel_packet_duration" : "20ms",
"codec_g726_aal2_format" : false,
"drop_call_thresholds_no_rx_packets" : "0 second",
"echo_cancellation" : {
"echo_cancellation_enabled" : true,
"enable_coefficient_update" : true,
"enable_dc_removal_filter" : true,
"gain_power_level" : "0",
"non_linear_processor_tune_option" : "Normal"
},
"jitter_buffer" : {
"initial_depth" : 20,
"max_depth" : 200,
"min_depth" : 20,
"smooth_deletion" : true
},
"packet_network" : {
"packet_loss_concealment" : true,
"type_of_service" : 0
},
"rtcp" : {
"rtcp_enabled" : false,
"sdes_cname" : "",
"transmission_interval" : "5 seconds",
"use_xrtcp" : false
},
"tdm_volume_control" : {
"rx_gain_level" : 0,
"tx_gain_level" : 0
},
"vad_noise_floor_level" : "-45"
},
"sdp" : {
"force_fax_tones_as_telephony_event" : false,
"profile_sdp_description" : "m=audio 0 RTP/AVP 0 8 4 18 101 13\r\na=rtpmap:101 telephone-event/8000\r\na=fmtp:101 0-15,32-36"
},
"sip" : {
"detect_180_with_sdp_as_early_media" : true,
"dont_forward_183_progress" : false,
"dtmf_relay_scheme" : [
"Relay DTMF according to RFC2833",
"Relay DTMF using SIP INFO messages",
"Relay DTMF in band"
],
"enable_sip_custom_headers" : false,
"forward_sip_hold_type" : "SS7 Remote Hold/Retrieval",
"forward_ss7_cpg_hold_retrieval" : true,
"forward_ss7_suspend_resume" : true,
"max_forwards_handling" : "Decrement and forward",
"sdp_combining_options" : [
"Use sender's codec order"
],
"sdp_generation_options" : [
],
"send_180_with_sdp" : false,
"use_isup_oli_format" : false,
"use_non_ambiguous_from_tag" : false,
"use_reason_header" : true,
"use_strict_routing" : false,
"user_to_user_encoding" : "Escaped text"
}
}
}
```
---
# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.
## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.
Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:
```
GET https://tmediadocs.telcobridges.com/configuration/web-portal-3-3/fax/fax-passthrough-nse/configure-fax-nse.md?ask=&goal=
```
`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.